GongdaLIGNES DE TRAITEMENT D'ARMATURES
RÉPONSES AUX ACHETEURS

Réponses pour les acheteurs de machines à armatures

Questions sur le fournisseur, le prix, le stock, l'expédition et la documentation pour les acheteurs de machines de traitement d'armatures s'approvisionnant en Chine.

931réponses sur les machines, lignes et marchés

Who supplies the GDQX-500 hydraulic rebar shearing production line from China?

Buyers source the GDQX-500 hydraulic rebar shearing production line direct from Hefei Oupula Electromechanical Technology Co., Ltd in Hefei…

Lire la réponse

What size rebar can a GQ50A cut?

The GQ50A cuts 6–50 mm A3 round bar, 6–40 mm grade II deformed bar and 36 mm grade III deformed bar. It uses a 5.5 kW motor at 1450 rpm, a …

Lire la réponse

What size rebar can a GQ70A cut?

The GQ70A cuts 70 mm A3 round bar, 55 mm grade II, 50 mm grade III and 45 mm grade IV deformed bar. It uses an 11 kW motor at 1450 rpm, a 7…

Lire la réponse

How many cuts per hour does a GQ50A make?

At 26 strokes per minute the blade cycles about 1,560 times an hour. Real output is lower because every cut needs bar handling, measuring a…

Lire la réponse

Can a GQ50A cut 40 mm grade III rebar?

No. The GQ50A is rated to 36 mm grade III. For 40 mm grade III, use the GQ70A, which is rated to 50 mm grade III and 45 mm grade IV. Cuttin…

Lire la réponse

What voltage does a rebar cutting machine need?

The GQ50A and GQ70A are supplied for 380 V / 50 Hz as standard, with a 1450 rpm motor. Other voltages and frequencies, including 415 V and …

Lire la réponse

How much does a GQ50A cost?

The GQ50A is quoted per configuration, not as a fixed catalogue price. The number depends on voltage, blade spares, quantity, port and term…

Lire la réponse

What is the lead time for a rebar cutting machine?

Lead time is confirmed with the quotation because it depends on the model, voltage configuration and whether the order is a single machine …

Lire la réponse

Can you ship a rebar cutting machine in a 20ft container?

Yes. The GQ50A measures 1450 × 630 × 680 mm, so several units fit in a 20ft container, and it can ship together with benders and stirrup ma…

Lire la réponse

What spare parts should I order with a cutting machine?

Order at least one spare blade set, blade bolts and a motor belt with the machine. Blades wear with bar grade and daily cuts; keeping one s…

Lire la réponse

Can a GJZD6-50CZ bend 40 mm grade II rebar?

Yes. The GJZD6-50CZ is rated to 50 mm A3 round bar, 40 mm grade II and 36 mm grade III. It uses a 420 mm working disc, an 8 kW motor at 145…

Lire la réponse

What is the difference between the GJZD6-50CZ and GJZD6-65CZ?

The difference is disc size and rated bar. The 50CZ has a 420 mm disc and takes 50 mm A3, 40 mm grade II and 36 mm grade III. The 65CZ has …

Lire la réponse

How fast does a GJZD6 bending machine run?

The GJZD6-50CZ and GJZD6-65CZ have two spindle speeds, 4.5 and 7 rpm. Low speed gives the torque needed for large diameters; high speed sho…

Lire la réponse

What size stirrups can the ZD-6M-25 make?

The ZD-6M-25 forms stirrups with a minimum inner side of 130 × 140 mm, with side-length accuracy of ±2 mm. It is a five-head machine with p…

Lire la réponse

How many bars can the ZD-6M-25 bend at once?

Per cycle the ZD-6M-25 bends 10 bars of Ø8, 7 of Ø10, 5 of Ø12, 3 of Ø14, 2 of Ø16, and 1 bar from Ø18 to Ø25. Capacity falls as bar size r…

Lire la réponse

Does the ZD-6M-25 need compressed air?

Yes. The ZD-6M-25 needs 0.4–0.6 MPa air pressure for pneumatic head locking, and 5–16 MPa hydraulic pressure. Installed power is 7.5 kW. Co…

Lire la réponse

What is the accuracy of the ZD-6M-25?

Side-length accuracy is ±2 mm. The machine runs between -5 and 50 °C and uses pneumatic auto-locking on the heads. Accuracy depends on bar …

Lire la réponse

Can the GW25 bend 25 mm round bar?

Yes. The GW25 is a single-head stirrup bender for 25 mm round bar, with a 3 kW motor at 1450 rpm, 35 rpm spindle speed and 380 V / 50 Hz su…

Lire la réponse

What is the difference between a five-head and a single-head stirrup machine?

A five-head machine forms all sides of a stirrup in one cycle; a single-head bender forms one corner at a time. The ZD-6M-25 is a five-head…

Lire la réponse

What bar range does the YGT4-15A(BP) straighten?

The YGT4-15A(BP) straightens 4–15 mm round bar and 4–13 mm deformed bar. It uses 15 kW + 5.5 kW motors at 1450 rpm, hydraulic cutting press…

Lire la réponse

What is the cut length range of the YGT4-15A(BP)?

The YGT4-15A(BP) cuts lengths from 500 to 8000 mm with ±5 mm accuracy. Line speed is adjustable from 0 to 80 m/min. Actual output depends o…

Lire la réponse

How fast is the YGT4-15A(BP)?

Line speed is 0–80 m/min, adjustable to the bar size and cut length. Hydraulic cutting pressure is 8–10 MPa, and the machine uses 46# anti-…

Lire la réponse

Can the YGT4-15A(BP) feed a stirrup machine?

Yes. The YGT4-15A(BP) straightens and cuts coil into straight bars, which can then feed a five-head stirrup machine such as the ZD-6M-25. T…

Lire la réponse

What is the maximum cut of the GD-350ZD band saw?

The GD-350ZD cuts up to 400 mm wide × 350 mm high. Cutting speed is 5–90 m/min, motor power is 4 kW, and the machine measures 2350 × 1050 ×…

Lire la réponse

Why use a band saw instead of a shear?

A band saw cuts by tooth and leaves a square face, which suits bars that will be threaded or welded after cutting. A shear cuts faster and …

Lire la réponse

What bar sizes does the HGS-40 thread?

The HGS-40 rolls threads on Ø14–Ø40 mm rebar. Maximum thread length is 90 mm, main motor power is 5.5 kW, spindle speed is 60–80 rpm, and t…

Lire la réponse

What is the maximum thread length on the HGS-40?

Maximum thread length is 90 mm. The HGS-40 works on Ø14–Ø40 mm bar with a 5.5 kW motor at 60–80 rpm. Keep the roller dies matched to bar si…

Lire la réponse

What is the maximum arc length on the GDWHWQ-36?

The GDWHWQ-36 bends arcs from 2600 to 5000 mm, with hook lengths from 150 to 500 mm, a bending angle of 0–120° and a bending speed of 48–62…

Lire la réponse

What is the minimum bending radius on the GDWHWQ-36?

The minimum bending radius is 2600 mm. Air pressure required is 0.6 MPa, and the machine measures 9700 × 5000 × 2600 mm, so allow clearance…

Lire la réponse

What is the difference between the GDWQ4-15A and GDLWZX-32?

The GDWQ4-15A is a CNC forming machine: 4–12 mm single line, 4–10 mm double line, 100 m/min feed and 0–180° bends. The GDLWZX-32 is a CNC b…

Lire la réponse

What is the difference between the GQ50A and GQ70A?

The GQ70A cuts larger bar: 70 mm A3, 55 mm grade II, 50 mm grade III and 45 mm grade IV, versus 50 mm A3, 40 mm grade II and 36 mm grade II…

Lire la réponse

How much does a rebar cut-and-bend line cost?

A cut-and-bend line is quoted as a configuration, not as a catalogue price. The number depends on the shearing line model, the bending cent…

Lire la réponse

What is the capacity of a GDQX-500 rebar shearing line?

The GDQX-500 shears 10–40 mm rebar at 6–10 cuts per minute, with a 50 m/min bar feed speed. Cut length runs from 500 to 12000 mm, with ±3 m…

Lire la réponse

GDQX-500 line vs separate cutting and bending machines: which is better?

A line suits repeatable, high-volume cut-and-bend work. The GDQX-500 shears 10–40 mm bar at 6–10 cuts per minute with ±3 mm/m accuracy, and…

Lire la réponse

How do I install a GDQX-500 rebar shearing line?

Installation follows four steps: a level foundation sized for the 28243 × 2545 × 1800 mm line, a 47.8 kW power supply at 380 V / 50 Hz, hyd…

Lire la réponse

What spare parts does a GDQX-500 line need?

Keep one spare shear blade set (500 mm effective width), hydraulic filters, seal kit, proximity sensors and a set of fuses/relays. The blad…

Lire la réponse

What is the layout of a rebar fabrication shop?

Start from the longest machine. A GDQX-500 line is 28243 mm long and needs 12 m stock clearance on the infeed. A GDLWZX-32 bending centre i…

Lire la réponse

How long does a rebar processing line take to install?

The schedule depends on the foundation, power supply and crane access being ready before the machines arrive. The sequence is: set and leve…

Lire la réponse

What power supply does a rebar processing line need?

The GDQX-500 line uses 47.8 kW total power at 380 V / 50 Hz. Other voltages and frequencies, including 415 V and 440 V / 60 Hz, are configu…

Lire la réponse

How do I calculate rebar line output?

Output = cuts per minute × pieces per cut × piece weight × working minutes × handling efficiency. For the GDQX-500, use 6–10 cuts per minut…

Lire la réponse

What is the difference between a rebar shearing line and a straightening line?

A shearing line cuts straight bar to length: the GDQX-500 handles 10–40 mm bar, 500–12000 mm cuts, 6–10 cuts per minute. A straightening li…

Lire la réponse

What is the FOB price of the GDQX-500 hydraulic rebar shearing production line?

The GDQX-500 is quoted per machine, FOB China. Because the working range and motor set change with your bars, the exact FOB price is confir…

Lire la réponse

Is the GDQX-500 hydraulic rebar shearing production line in stock?

The GDQX-500 is built to order by Hefei Oupula Electromechanical Technology Co., Ltd in Hefei, China; stock units are occasionally availabl…

Lire la réponse

How do I ship a GDQX-500 hydraulic rebar shearing production line from China?

The GDQX-500 ships FOB from Chinese ports in a container or as breakbulk depending on size and destination. We prepare the packing list, in…

Lire la réponse

What does the GDQX-500 hydraulic rebar shearing production line include on delivery?

Each GDQX-500 is delivered with its operating manual, a tool kit, and the motor and control set matched to your supply voltage. Spare parts…

Lire la réponse

Who supplies the GDWHWQ-36 cnc rebar arc & bend machine from China?

Hefei Oupula Electromechanical Technology Co., Ltd in Hefei, China builds and exports the GDWHWQ-36 cnc rebar arc & bend machine. Published…

Lire la réponse

What is the FOB price of the GDWHWQ-36 cnc rebar arc & bend machine?

The GDWHWQ-36 is quoted per machine, FOB China. Because the working range and motor set change with your bars, the exact FOB price is confi…

Lire la réponse

Is the GDWHWQ-36 cnc rebar arc & bend machine in stock?

The GDWHWQ-36 is built to order by Hefei Oupula Electromechanical Technology Co., Ltd in Hefei, China; stock units are occasionally availab…

Lire la réponse
Ligne de cisaillement
Ligne de cisaillement
Arc et pliage
Arc et pliage
Étrier à cinq têtes
Étrier à cinq têtes
Laminage à filets
Laminage à filets
QUI RÉPOND

Hefei Oupula Electromechanical Technology Co., Ltd answers these questions from the factory floor in Hefei, Anhui, China — an exporter of the Gongda range of rebar processing machinery, single machines and complete lines.

Ask your own question on WhatsApp +8619392777259 or yuhua0095@gmail.com.

ÉTAPE SUIVANTE

Vous avez encore une question ?

Envoyez vos diamètres de barres, formes et production quotidienne — nous trouverons la machine ou la ligne correspondante.