Antworten für Käufer von Bewehrungsstahlmaschinen
Fragen zu Lieferant, Preis, Lagerbestand, Versand und Dokumentation für Käufer, die Bewehrungsstahl-Verarbeitungsmaschinen aus China beziehen.

Rebar Bending & Stirrup Machines
Diese Antworten durchsuchen
Rebar Cutting & Straightening Machines
Diese Antworten durchsuchen
Rebar Auxiliary, Threading & Welding Equipment
Diese Antworten durchsuchenWho supplies the GDQX-500 hydraulic rebar shearing production line from China?
Buyers source the GDQX-500 hydraulic rebar shearing production line direct from Hefei Oupula Electromechanical Technology Co., Ltd in Hefei…
Antwort lesenWhat size rebar can a GQ50A cut?
The GQ50A cuts 6–50 mm A3 round bar, 6–40 mm grade II deformed bar and 36 mm grade III deformed bar. It uses a 5.5 kW motor at 1450 rpm, a …
Antwort lesenWhat size rebar can a GQ70A cut?
The GQ70A cuts 70 mm A3 round bar, 55 mm grade II, 50 mm grade III and 45 mm grade IV deformed bar. It uses an 11 kW motor at 1450 rpm, a 7…
Antwort lesenHow many cuts per hour does a GQ50A make?
At 26 strokes per minute the blade cycles about 1,560 times an hour. Real output is lower because every cut needs bar handling, measuring a…
Antwort lesenCan a GQ50A cut 40 mm grade III rebar?
No. The GQ50A is rated to 36 mm grade III. For 40 mm grade III, use the GQ70A, which is rated to 50 mm grade III and 45 mm grade IV. Cuttin…
Antwort lesenWhat voltage does a rebar cutting machine need?
The GQ50A and GQ70A are supplied for 380 V / 50 Hz as standard, with a 1450 rpm motor. Other voltages and frequencies, including 415 V and …
Antwort lesenHow much does a GQ50A cost?
The GQ50A is quoted per configuration, not as a fixed catalogue price. The number depends on voltage, blade spares, quantity, port and term…
Antwort lesenWhat is the lead time for a rebar cutting machine?
Lead time is confirmed with the quotation because it depends on the model, voltage configuration and whether the order is a single machine …
Antwort lesenCan you ship a rebar cutting machine in a 20ft container?
Yes. The GQ50A measures 1450 × 630 × 680 mm, so several units fit in a 20ft container, and it can ship together with benders and stirrup ma…
Antwort lesenWhat spare parts should I order with a cutting machine?
Order at least one spare blade set, blade bolts and a motor belt with the machine. Blades wear with bar grade and daily cuts; keeping one s…
Antwort lesenCan a GJZD6-50CZ bend 40 mm grade II rebar?
Yes. The GJZD6-50CZ is rated to 50 mm A3 round bar, 40 mm grade II and 36 mm grade III. It uses a 420 mm working disc, an 8 kW motor at 145…
Antwort lesenWhat is the difference between the GJZD6-50CZ and GJZD6-65CZ?
The difference is disc size and rated bar. The 50CZ has a 420 mm disc and takes 50 mm A3, 40 mm grade II and 36 mm grade III. The 65CZ has …
Antwort lesenHow fast does a GJZD6 bending machine run?
The GJZD6-50CZ and GJZD6-65CZ have two spindle speeds, 4.5 and 7 rpm. Low speed gives the torque needed for large diameters; high speed sho…
Antwort lesenWhat size stirrups can the ZD-6M-25 make?
The ZD-6M-25 forms stirrups with a minimum inner side of 130 × 140 mm, with side-length accuracy of ±2 mm. It is a five-head machine with p…
Antwort lesenHow many bars can the ZD-6M-25 bend at once?
Per cycle the ZD-6M-25 bends 10 bars of Ø8, 7 of Ø10, 5 of Ø12, 3 of Ø14, 2 of Ø16, and 1 bar from Ø18 to Ø25. Capacity falls as bar size r…
Antwort lesenDoes the ZD-6M-25 need compressed air?
Yes. The ZD-6M-25 needs 0.4–0.6 MPa air pressure for pneumatic head locking, and 5–16 MPa hydraulic pressure. Installed power is 7.5 kW. Co…
Antwort lesenWhat is the accuracy of the ZD-6M-25?
Side-length accuracy is ±2 mm. The machine runs between -5 and 50 °C and uses pneumatic auto-locking on the heads. Accuracy depends on bar …
Antwort lesenCan the GW25 bend 25 mm round bar?
Yes. The GW25 is a single-head stirrup bender for 25 mm round bar, with a 3 kW motor at 1450 rpm, 35 rpm spindle speed and 380 V / 50 Hz su…
Antwort lesenWhat is the difference between a five-head and a single-head stirrup machine?
A five-head machine forms all sides of a stirrup in one cycle; a single-head bender forms one corner at a time. The ZD-6M-25 is a five-head…
Antwort lesenWhat bar range does the YGT4-15A(BP) straighten?
The YGT4-15A(BP) straightens 4–15 mm round bar and 4–13 mm deformed bar. It uses 15 kW + 5.5 kW motors at 1450 rpm, hydraulic cutting press…
Antwort lesenWhat is the cut length range of the YGT4-15A(BP)?
The YGT4-15A(BP) cuts lengths from 500 to 8000 mm with ±5 mm accuracy. Line speed is adjustable from 0 to 80 m/min. Actual output depends o…
Antwort lesenHow fast is the YGT4-15A(BP)?
Line speed is 0–80 m/min, adjustable to the bar size and cut length. Hydraulic cutting pressure is 8–10 MPa, and the machine uses 46# anti-…
Antwort lesenCan the YGT4-15A(BP) feed a stirrup machine?
Yes. The YGT4-15A(BP) straightens and cuts coil into straight bars, which can then feed a five-head stirrup machine such as the ZD-6M-25. T…
Antwort lesenWhat is the maximum cut of the GD-350ZD band saw?
The GD-350ZD cuts up to 400 mm wide × 350 mm high. Cutting speed is 5–90 m/min, motor power is 4 kW, and the machine measures 2350 × 1050 ×…
Antwort lesenWhy use a band saw instead of a shear?
A band saw cuts by tooth and leaves a square face, which suits bars that will be threaded or welded after cutting. A shear cuts faster and …
Antwort lesenWhat bar sizes does the HGS-40 thread?
The HGS-40 rolls threads on Ø14–Ø40 mm rebar. Maximum thread length is 90 mm, main motor power is 5.5 kW, spindle speed is 60–80 rpm, and t…
Antwort lesenWhat is the maximum thread length on the HGS-40?
Maximum thread length is 90 mm. The HGS-40 works on Ø14–Ø40 mm bar with a 5.5 kW motor at 60–80 rpm. Keep the roller dies matched to bar si…
Antwort lesenWhat is the maximum arc length on the GDWHWQ-36?
The GDWHWQ-36 bends arcs from 2600 to 5000 mm, with hook lengths from 150 to 500 mm, a bending angle of 0–120° and a bending speed of 48–62…
Antwort lesenWhat is the minimum bending radius on the GDWHWQ-36?
The minimum bending radius is 2600 mm. Air pressure required is 0.6 MPa, and the machine measures 9700 × 5000 × 2600 mm, so allow clearance…
Antwort lesenWhat is the difference between the GDWQ4-15A and GDLWZX-32?
The GDWQ4-15A is a CNC forming machine: 4–12 mm single line, 4–10 mm double line, 100 m/min feed and 0–180° bends. The GDLWZX-32 is a CNC b…
Antwort lesenWhat is the difference between the GQ50A and GQ70A?
The GQ70A cuts larger bar: 70 mm A3, 55 mm grade II, 50 mm grade III and 45 mm grade IV, versus 50 mm A3, 40 mm grade II and 36 mm grade II…
Antwort lesenHow much does a rebar cut-and-bend line cost?
A cut-and-bend line is quoted as a configuration, not as a catalogue price. The number depends on the shearing line model, the bending cent…
Antwort lesenWhat is the capacity of a GDQX-500 rebar shearing line?
The GDQX-500 shears 10–40 mm rebar at 6–10 cuts per minute, with a 50 m/min bar feed speed. Cut length runs from 500 to 12000 mm, with ±3 m…
Antwort lesenGDQX-500 line vs separate cutting and bending machines: which is better?
A line suits repeatable, high-volume cut-and-bend work. The GDQX-500 shears 10–40 mm bar at 6–10 cuts per minute with ±3 mm/m accuracy, and…
Antwort lesenHow do I install a GDQX-500 rebar shearing line?
Installation follows four steps: a level foundation sized for the 28243 × 2545 × 1800 mm line, a 47.8 kW power supply at 380 V / 50 Hz, hyd…
Antwort lesenWhat spare parts does a GDQX-500 line need?
Keep one spare shear blade set (500 mm effective width), hydraulic filters, seal kit, proximity sensors and a set of fuses/relays. The blad…
Antwort lesenWhat is the layout of a rebar fabrication shop?
Start from the longest machine. A GDQX-500 line is 28243 mm long and needs 12 m stock clearance on the infeed. A GDLWZX-32 bending centre i…
Antwort lesenHow long does a rebar processing line take to install?
The schedule depends on the foundation, power supply and crane access being ready before the machines arrive. The sequence is: set and leve…
Antwort lesenWhat power supply does a rebar processing line need?
The GDQX-500 line uses 47.8 kW total power at 380 V / 50 Hz. Other voltages and frequencies, including 415 V and 440 V / 60 Hz, are configu…
Antwort lesenHow do I calculate rebar line output?
Output = cuts per minute × pieces per cut × piece weight × working minutes × handling efficiency. For the GDQX-500, use 6–10 cuts per minut…
Antwort lesenWhat is the difference between a rebar shearing line and a straightening line?
A shearing line cuts straight bar to length: the GDQX-500 handles 10–40 mm bar, 500–12000 mm cuts, 6–10 cuts per minute. A straightening li…
Antwort lesenWhat is the FOB price of the GDQX-500 hydraulic rebar shearing production line?
The GDQX-500 is quoted per machine, FOB China. Because the working range and motor set change with your bars, the exact FOB price is confir…
Antwort lesenIs the GDQX-500 hydraulic rebar shearing production line in stock?
The GDQX-500 is built to order by Hefei Oupula Electromechanical Technology Co., Ltd in Hefei, China; stock units are occasionally availabl…
Antwort lesenHow do I ship a GDQX-500 hydraulic rebar shearing production line from China?
The GDQX-500 ships FOB from Chinese ports in a container or as breakbulk depending on size and destination. We prepare the packing list, in…
Antwort lesenWhat does the GDQX-500 hydraulic rebar shearing production line include on delivery?
Each GDQX-500 is delivered with its operating manual, a tool kit, and the motor and control set matched to your supply voltage. Spare parts…
Antwort lesenWho supplies the GDWHWQ-36 cnc rebar arc & bend machine from China?
Hefei Oupula Electromechanical Technology Co., Ltd in Hefei, China builds and exports the GDWHWQ-36 cnc rebar arc & bend machine. Published…
Antwort lesenWhat is the FOB price of the GDWHWQ-36 cnc rebar arc & bend machine?
The GDWHWQ-36 is quoted per machine, FOB China. Because the working range and motor set change with your bars, the exact FOB price is confi…
Antwort lesenIs the GDWHWQ-36 cnc rebar arc & bend machine in stock?
The GDWHWQ-36 is built to order by Hefei Oupula Electromechanical Technology Co., Ltd in Hefei, China; stock units are occasionally availab…
Antwort lesen



Hefei Oupula Electromechanical Technology Co., Ltd answers these questions from the factory floor in Hefei, Anhui, China — an exporter of the Gongda range of rebar processing machinery, single machines and complete lines.
Ask your own question on WhatsApp +8619392777259 or yuhua0095@gmail.com.
Noch eine Frage?
Senden Sie Ihre Stabdurchmesser, Formen und Tagesleistung — wir finden die passende Maschine oder Linie.